|
Slab Gate Valve
Technical parameters and characteristics：
|
Product type |
ON/OFF |
|
Product description |
Single- and double-plate flat gate valve with deflector hole |
|
Model |
Zp43/4H(F)-Slab Gate Valve |
|
Nominal diameter |
NPS 2”～48”(DN50～DN1200) |
|
Operating temperature |
-196℃～593℃(the range of service temperature may vary for different materials) |
|
Nominal pressure |
CLASS 150～1500 （PN20～PN260） |
|
Material |
Main material: A216 WCB、WCC; A217 WC6、WC9、C5、C12、C12A、CA15; A351 CF8、CF8M、CF3、CF3M、CF8C、CN3MN、CK3MCUN、CN7M; A352 LCB、LCC; A494 CW-6MC、CU5MCuC、M35-1; A890 4A(CD3MN)、5A(CE3MN)、6A(CD3MWCuN); ASME B 148 C95800、C95500, etc. |
|
Design standard |
API 6D、ASME B16.34 |
|
Structural length |
ASME B16.10、GB/T 12221 |
|
Connecting end |
ASME B16.5、ASME B16.47、ASME B16.25 |
|
Test standard |
API 598、ISO 5208、GB/T 26480 |
|
Operation method |
non-elevating hand wheel, bevel gear, motor drive unit, pneumatic drive unit |
|
Application fields |
Oil and natural gas pipelines, and urban gas pipeline |
|
Other remarks 1 |
The valve seat is embedded with flexible seal ring for zero leakage of seal; the valve seat and the slide sealing surface are build-up welded with hard alloy to improve the scouring resistance and extend the service life of the valve. |
|
Other remarks 2 |
SS+ graphite or metallic seal or pressure self-sealing is adopted between valve body and bonnet for reliable sealing |
|
Other remarks 3 |
Rising stem structure, making the valve switch position be clear at a glance |
|
Other remarks 4 |
The valve stem thread will not come into contact with the medium, so the corrosion of medium to the thread is reduced. |
|
Other remarks 5 |
Small switching moment, reliable sealing |
|
Other remarks 6 |
The flat gate valve with deflector hole is also convenient for pigging. |
|
Other remarks 7 |
Small flow resistance, high flow capacity and good flow characteristics |
|
Other remarks 8 |
K-plate flat gate valve can realize zero leakage through the valve seat of special process. |
|
Other remarks 9 |
Through improving the structural design and selecting reasonable packing structure and qualified packing supplier, the valves can meet the Class A sealing test requirements of ISO 15848 FE. |